A set of 2 non-invasive fittings for attaching both roman or roller blinds to a window frame without making any holes for fitting.
This is a universal fit for most PCV and wooden windows. Please note these brackets will not fit non-standard window frames that are rounded at the top.
Depending on the width of the blind we recommend the following number of fittings per blind:
up to 100 cm / 40" - 2 brackets/1 set
101 to 130 cm / 50" - 3 brackets
131 to 160 cm / 60" - 4 brackets
161 to 200 cm / 80" - 5 brackets
These fittings can be used for attaching to the window frame both roller and roman blinds. The instructions that come with the brackets apply to roller blinds, so please see below for instructions for fitting a ROMAN BLIND. To fit a roman blind:
Step 1. Place the fittings onto the top of the window frame
Step 2. Unscrew a screw from a bracket, place a standard roman blind bracket (that comes with all roman blinds we supply) in front of it and use the screw to attach the roman blind fitting to the non-invasive window fitting. Repeat this step for all brackets.
Step 3. Place the roman blind rail in front of the roman blind brackets and clip it into place.
Fitting of roman blind brackets:
|| View from the side (non-invasive fitting + roman blind bracket + roman blind rail)
|| View from the bottom (non-invasive fitting + roman blind bracket + roman blind rail)