Installation of a Roman blind on an aluminium rail on a window sash

1. Using the screws and rectangular nuts, attach the blind brackets (A) to the window frame brackets (B). If the window is fitted with an air vent, position elements (A) as close as possible to elements (B).

2. Place the assembled brackets onto the window sash frame.

3. Carefully tighten the bracket to the window frame using a screwdriver.

4. Fit the flexible cover cap.

5. Place the blind rail from above, gently pressing its lower edge towards the window until you hear a characteristic click.

6. To prevent the cord from hanging loosely beside the window, it is recommended to install the dedicated safety hook. Mount it on the appropriate side of the blind at a convenient height.

ALTERNATIVE INSTALLATION METHOD

It is also possible to install the blind so that it projects further from the window (approximately 5 cm). Remove the screw from the window frame bracket (B) and use it to attach the blind bracket (A) to the window frame bracket (B).

WARNING!

Risk of strangulation!

Keep cords and chain loops out of reach of small children!

The packaging contains small parts!

Small parts may be swallowed and cause choking hazards for children!